Starter Solenoid - Factory Five Racing Mk4 Roadster Assembly Manual

Run the harness over the pedal box and through the large hole in the firewall.
Dash harness going through laser cut hole.
The dash harness can then be run on top of the 2"x 2" square tube over to the computer side. Run
everything loosely so that final positioning can be done.

Starter Solenoid

There are two different starters that were used and the wires are run differently for each.

On older (large) starters, the cable runs from the starter to the empty post on the solenoid.

On the newer starters the heavy starter wire connects to the same terminal as the body and the
smaller 8-10 gauge wire runs to the empty terminal. The newer starters can be recognized by
their smaller size and solenoid mounted on top.
(+) Battery cable
Yellow wire
Green wire
Orange/Dark Blue wire
Starter Solenoid Wiring
208
www.factoryfive.com 508-291-3443
Red/blue wire
Black cable to Starter