Rattle Patrol - Factory Five Racing Mk4 Roadster Assembly Manual

Turn the steering wheel all the way to the left.
Fill the reservoir to the full cold level and leave the cap off.
Turn the steering wheel lock to lock 20 times checking the fluid level every few times. Top off if
necessary.
Start the engine and check the fluid level.
Reinstall the reservoir cap and turn the steering wheel lock to lock a few times.
Check for leaks, smooth assist and noiseless operation. If there are noises, turn the engine off, wait two
minutes and redo the procedure.

Rattle Patrol

Review the race car check list in the Appendix.
Get the engine up to temperature and check for leaks and make sure the fan is working.
After running the car for the first time once coolant is added and while the system is still warm, retighten
the hose clamps used on the cooling system.
If you need to you can temporarily bolt your side-pipes in place to keep things quieter.
If you have the space in your driveway or have access to a small parking lot it is very helpful to drive the
chassis around a little to make sure everything is working before you seal it all up.
 
If you do this, bolt the seat harnesses in and use them
You will be very surprised at how quickly the car responds to small inputs and it is amplified by being
extra light without the body in place. Things to check for:
 Any leaks – brake fluid – transmission fluid – engine oil – rear diff fluid – coolant
330
www.factoryfive.com 508-291-3443