Mounting The Body; Rear Quick Jacks - Factory Five Racing Mk4 Roadster Assembly Manual

The push-on weather strip needs to run across the top of the firewall and the trunk walls and rear floor.

Mounting the Body

Rear Quick Jacks


⅝" wrench, ⅝" socket, ratchet

Quick jack bumper components

The main locating points for the body are the rear quick jack mounts; these will set the body in
the correct position front to back as well as locating the rear half up and down and side to side.

When bolting the body down the first time to do the fitment you can leave the quick jacks off
and only use the hardware, this makes it easier to maneuver around and safer when crawling out
from under the car.
Find the quick Jack hardware that came mounted on the chassis.
337
www.factoryfive.com 508-291-3443