Fuel Filter - Factory Five Racing Mk4 Roadster Assembly Manual

Fuel Filter


Tube bender, 3 /
16
wrenches

Insulated clip hardware, Fuel line components, ¼",
mount, Mustang tank to filter nylon hose, Mustang fuel vapor hose.

Make sure to install the fuel filter in the correct flow direction.

Determine whether or not a new filter is needed. It's a good general rule to replace the filter no
matter what.
Attach the Mustang nylon fuel line to the filter and the tank to show where your mounting location must
be.
Hold the filter up to the 2"x 3" chassis tube, mark the holes, then drill and rivet the bracket on using
rivets.
"drill bit, drill, rivet tool, marker, tape measure, flat head screwdriver,
www.factoryfive.com
5 / " fuel lines, Mustang Fuel filter and
16
186
508-291-3443
9 / "
16
3 / "
16