Engine/Transmission Installation - Factory Five Racing Mk4 Roadster Assembly Manual

Oil pick-up inlet bolted to block.
Attach the new oil pan to the block using the included short bolts over the rear kick-out. Torque the oil
pan bolts using Fords tightening sequence and 15 ft-lbs. (20 Nm) plus an additional 60 degrees.

Engine/Transmission Installation


Engine hoist, chain, ¾",

Engine, Polyurethane engine/transmission mount kit

Locate the pin stamped VIN number on the engine and the transmission. Some states check for
these numbers during registration and they are hard to see on the 4.6. It may be useful to take
15 / " sockets, ratchet, extension
16
244
www.factoryfive.com 508-291-3443