Body Cut-Outs; Fuel Filler - Factory Five Racing Mk4 Roadster Assembly Manual

Body Cut-outs

Fuel filler


Drill, ⅛",
7 / " drill bit, 3½" hole saw or air saw or jig saw, masking tape, scissors.
32

Fuel filler template, Aston Lemans Cap components.
Locate the template in the appendix and only cut out around the outside diameter of the circle. Tape the
circle in the gas cap recess of the body.
Use a ⅛" drill bit for all except one of the outer screw holes. Use a
374
www.factoryfive.com 508-291-3443
/ " bit drill for the last small hole.
7 32