87-93 - Mount the lower control arms using the outer set of holes on the chassis using the supplied
hardware.
94-04 - stock lower control arms, use the inner set of bolt holes.
FFR tubular lower control arms - use the outer mounting holes.
While holding the control arm parallel to the ground, torque the bolts to 135-149Nm (100-110 lbft).
Front upper control arm
Vise, Thread locker, ⅜", ¾" wrench, ¾" socket, Torque wrench
IFS components
Unpack the upper control arm assembly.
91
www.factoryfive.com
508-291-3443