Remove the brake pedal spring from its mount hole and remove the plate on the front of the pedal box
along with the round spacers.
Relocate brake pedal spring to pedal box triangular opening.
Wiring Harness
Razor knife, electrical tape.
Many people choose to cut down the wiring harness to use only the wires and leads that are
needed. You can save about 20 lbs. by doing this. Be sure to follow the schematics and avoid
cutting circuits you need. Some suggested parts to remove are:
Speaker wires
Radio wiring
63
www.factoryfive.com
508-291-3443