94-04 Mounting; Radiator Mounting - Factory Five Racing Mk4 Roadster Assembly Manual

Reposition the fan assembly and mount using the #8 Phillips head screws with countersunk washers.

Make sure that the fan blades do not hit the sides of the fan housing once the fan is attached to
the shroud. If they do make contact with the housing, loosen the screws attaching the mount
bars, and bend the tabs of the mount bars so that the fan housing is not pulled out of round when
the fasteners are tightened.
Remount the radiator reservoir with a
Mount the shroud and fan to the radiator using the fasteners that you removed earlier.

94-04 Mounting

Attach the stock radiator fan/shroud to the radiator.

Radiator Mounting

Zip tie the radiator in place on the chassis. The bottom section can just hang by a couple ties looped
around the lower outlet and the drain.
Move the radiator towards passenger side until the filling cap just clears the frame.
5 / " socket and attach the overflow hose to the barb under the cap.
16
274
www.factoryfive.com 508-291-3443