Cockpit Aluminum - Factory Five Racing Mk4 Roadster Assembly Manual

Tighten the upper and lower bearings. Also tighten the set screw on the upper shaft.

Cockpit Aluminum


Drill, ⅛" drill bit, rivet tool, Silicone, caulking gun, #8 self tapping screws, #8 hex nut driver,
ruler, marker, Acetone or carburetor cleaner, rags.

Packaged aluminum, mounted aluminum, Secondary body fasteners.

Do one panel at a time. Be careful of the sharp aluminum edges, they can cut you.
167
www.factoryfive.com 508-291-3443