Rivet Spacing Tool
Packaged Aluminum
In most cases we use a 3" rivet spacing when mounting aluminum panels to the chassis and a 2"
spacing when mounting panel to panel. The rivet spacing tool has this hole spacing marked.
The distance from the edge of the tool to the holes is correct to center the rivets on the ¾" tubes.
Align the edge of the tool with the marker line made around the tubes and mark the rivet holes
with a marker.
Use the ⅛" rivets for all of the aluminum panels unless otherwise directed.
Engine bay F panel aluminum
Marker, ⅛" drill bit, drill, Rivet gun, Silicone, Caulking gun, brake cleaner or acetone
Secondary Body Fasteners
Engine bay F panel aluminum
Marker,
/
" drill bit, drill, Rivet gun, Silicone, Caulking gun, brake cleaner or acetone
1
8
Secondary Body Fasteners
87
www.factoryfive.com
508-291-3443