96-04 Dash Harness - Factory Five Racing Mk4 Roadster Assembly Manual

Hide thumbs Also See for Mk4 Roadster:

Table of Contents

When the wire harness is installed, mount the fuse panel (Use the diagram in Appendix A to determine

the correct shape) to the 2"x 2" dash hoop support and between the two ¾" x ¾" frame tubes in the

driver's side footbox using the aluminum bracket provided and a few of the self-tapping screws.

Leave the headlight and hazard switches hanging for now.

Attach the harness across the 2"x 2" tube, using the insulated line clips.

96-04 Dash Harness

www.factoryfive.com

508-291-3443