Accelerator Cable
Accelerator cable components, insulated clip hardware
The cable design is set up for a 96-04 4.6L Mustang engine with an OEM pedal but, using the supplied
ball studs and retainers it can be adapted for all applications.
Cut the barrel fitting off the end of the cable.
Push and twist the ball stud retainer onto the end of the cable and attach the ball stud retainer using a
key.
87-93 5.0L Fuel Injected Applications
Run the accelerator cable to its proper position on the engine.
219
www.factoryfive.com
508-291-3443
" hex
5
/
64