Configuring Pc Port Mode - Matrix Sparsh VP110 User Manual

• Click Confirm to save the change.

Configuring PC Port Mode

The PC port on the back of the IP phone is used to connect a PC, which can be configured in the following mode:
• Bridge: The IP phone functions as a bridge, and the connected PC appears on the network as a stand-
alone device with its own IP address.
Procedure
PC port mode can be configured using the configuration files or locally.
Configuration File
Local
To configure the PC port mode via web user interface:
• Click on Network->PC Port.
• Select the desired value from the PC Port Active list.
• Click Confirm to save the change.
Matrix SPARSH VP110 User Guide
<MAC>.cfg
Web User Interface
Phone User Interface
Configure the PC port mode.
Disable the PC port.
For more information, refer "Appendix
D ‐ Configuration Parameters".
Configure the PC port mode.
Disable the PC port.
Navigate to:
http://<phoneIPAddress>/
servlet?p=network‐pcport&q=load
Configure the PC port mode.
55