Matrix Sparsh VP110 User Manual page 349

To configure play hold tone and play hold tone delay via web user interface:
• Click on Features->General Information.
• Select the desired value from the Play Hold Tone list.
• Enter the desired time (in seconds) in the Play Hold Tone Delay field.
• Click Confirm to save the change.
Why can't I send a SMS to any other phone?
SMS depends on support from a SIP server. Contact your ITSP for more information.
How to change the user password?
To change the user password via web user interface:
• Click on Security->Password.
• Select user from the User Type list.
• Enter the new user password in the New Password field and Confirm Password field.
• Click Confirm to save the change.
• If logging into the web user interface of the phone with the user credential, you need to enter the
current user password in the Old Password field.
• User password is configurable via web user interface only.
How to make a call using SRTP?
You can enable SRTP to encrypt the audio stream(s) of phone calls. The parties participating in the call should
enable SRTP. To enable SRTP via web user interface, refer "SRTP".
How to reboot the phone?
To reboot the phone via web user interface:
• Click on Settings->Upgrade.
• Click Reboot to reboot the phone.
Any reboot of the phone may take a few minutes.
How to export PCAP trace?
We may need you to provide a PCAP trace to help analyze your problem. To export a PCAP trace via web user
interface, refer "Capturing Packets (Packet
How to export system log?
We may need you to provide debug log information to help analyze problem. By default, you can export the debug
system log information to local PC. To export the system log to local PC via web user interface, refer
Files".
Matrix SPARSH VP110 User Guide
Capture)".
"Viewing Log
341