Sending Rtp Stream - Matrix Sparsh VP110 User Manual

Example

Sending RTP Stream

Parameter-
multicast.codec
Description
Format
Default Value
Range
Example
Receiving RTP Stream
Parameter-
multicast.receive_priority.enable
Description
Format
Default Value
Range
Example
422
account.1.subscribe_mwi_to_vm = 0
Configuration File
<MAC>.cfg
Configures a multicast codec for the IP phone to
use to send an RTP stream.
string
G722
Valid values are:
• PCMU
• PCMA
• G729
• G722
• G723_53
• G723_63
• iLBC
• G726‐32
multicast.codec = G722
Configuration File
<MAC>.cfg
Enables or disables the IP phone to handle the
incoming multicast paging calls when there is an
active multicast paging call on the IP phone.
If it is set to 1 (Enabled), the IP phone will answer
the incoming multicast paging call with a higher
priority and ignore that with a lower priority.
Boolean
1
Valid values are:
0‐Disabled
1‐Enabled
multicast.receive_priority.enable =1
Matrix SPARSH VP110 User Guide