Action Uri - Matrix Sparsh VP110 User Manual

Action URI

Opposite to action URL, action URI allows IP phones to interact with web server application by receiving and
handling an HTTP or HTTPS GET request. When receiving a GET request, the IP phone will perform the specified
action and respond with a 200 OK message. A GET request may contain variable named as "key" and variable
value, which are separated by "=". The valid URI format is: http(s)://phone IPaddress/servlet?key=variable value.
The following table lists pre-defined variable values:
OK
ENTER
SPEAKER
F_TRANSFER
VOLUME_UP
VOLUME_DOWN
MUTE
F_HOLD
X
0‐9/*/POUND
F_CONFERENCE
F1‐F4
MSG
HEADSET
RD
UP/DOWN/LEFT/RIGHT
Reboot
AutoP
DNDOn
DNDOff
number=xxx&outgoing_uri=y
OFFHOOK
ONHOOK
ANSWER
Matrix SPARSH VP110 User Guide
Variable Value Phone Action
Press the OK key.
Press the Enter soft key.
Press the Speakerphone key.
Transfers a call to another party.
Increase the volume.
Decrease the volume.
Mute the call.
Place an active call on hold.
Cancel actions or reject incoming calls.
Press the keypad (0‐9, * or #).
Press the Conference soft key.
Press the soft keys.
Press the MESSAGE key.
Press the HEADSET key.
Press the RD key.
Press the navigation keys.
Reboot the IP phone.
Perform auto provisioning.
Activate the DND feature.
Deactivate the DND feature.
Place a call to xxx from SIP URI y.
Pick up the handset.
Hang up the handset.
Answer a call.
253