Matrix Sparsh VP110 User Manual page 207

Procedure
Configuration changes can be performed using the configuration files or locally.
Configuration File
Local
To configure the method of transmitting DTMF digits via web user interface:
• Click on Account-> Advanced.
• Select the desired value from the DTMF Type list.
• If SIP INFO or AUTO or SIP INFO is selected, select the desired value from the DTMF Info Type list.
Matrix SPARSH VP110 User Guide
<MAC>.cfg
<MAC>.cfg
Web User Interface
Configure the method of transmitting
DTMF digit and the payload type.
For more information, refer
"Appendix D ‐ Configuration
Parameters".
Configure the number of times for the
IP phone to send the end RTP Event
packet.
For more information, refer
"Appendix D ‐ Configuration
Parameters".
Configure the method of transmitting
DTMF digits and the payload type.
Navigate to:
http://<phoneIPAddress>/
servlet?p=account‐
adv&q=load&acc=0
Configure the number of times for the
IP phone to send the end RTP Event
packet.
Navigate to:
http://<phoneIPAddress>/
servlet?p=features‐general&q=load
199