Calling Line Identification Presentation (Clip) - Matrix Sparsh VP110 User Manual

Calling Line Identification Presentation (CLIP)

Calling Line Identification Presentation (CLIP) allows IP phones to display the caller identity, derived from a SIP
header contained in the INVITE message when receiving an incoming call. IP phones support deriving caller
identity from three types of SIP header: From, P-Asserted-Identity and Remote-Party-ID. Identity presentation is
based on the identity in the relevant SIP header.
If the caller has existed in the local directory, the local contact name assigned to the caller should be preferentially
displayed and stored in the call log.
You may also refer "Connected Line Identification Presentation
Procedure
CLIP can be configured using the configuration files or locally.
Configuration File
Local
To configure the presentation of the caller identity via web user interface:
• Click on Account-> Advanced.
• Select the desired value from the Caller ID Source list.
Matrix SPARSH VP110 User Guide
<MAC>.cfg
Web User Interface
(COLP)".
Configure the presentation of the
caller identity.
For more information, refer
"Appendix D ‐ Configuration
Parameters".
Configure the presentation of the
caller identity.
Navigate to:
http://<phoneIPAddress>/
servlet?p=account‐
adv&q=load&acc=0
195