Matrix Sparsh VP110 User Manual page 368

Parameter-
network.pppoe.password
Description
Format
Default Value
Range
Example
Internet and PC Ports Transmission Methods
Internet Port Transmission Method
Parameter-
network.internet_port.speed_duplex
Description
Format
Default Value
Range
Example
PC Port Transmission Method
Parameter-
network.pc_port.speed_duplex
Description
Format
360
Configuration File
<MAC>.cfg
Configures the PPPoE password when the Internet port
type is configured as PPPoE and the IP address mode is
configured as IPv4 or IPv4&IPv6.
Note: If you change this parameter, the IP phone will
reboot to make the change take effect.
String
Blank
String within 99 characters
network.pppoe.password = matrix
Configuration File
<MAC>.cfg
Configures the transmission method of Internet port.
Note: We recommend that you do not change this
parameter. If you change this parameter, the IP phone
will reboot to make the change take effect.
Integer
0
Valid values are:
0‐Auto negotiate
1‐Full duplex, 10Mbps
2‐Full duplex, 100Mbps
3‐Half duplex, 10Mbps
4‐Half duplex, 100Mbps
network.internet_port.speed_duplex = 0
Configuration File
<MAC>.cfg
Configures the transmission method of PC port.
Note: We recommend that you do not change this
parameter. If you change this parameter, the IP phone
will reboot to make the change take effect.
Integer
Matrix SPARSH VP110 User Guide