Matrix Sparsh VP110 User Manual page 375

Web Server Type
Parameter-
wui.http_enable
Description
Format
Default Value
Range
Example
Parameter-
network.port.http
Description
Format
Default Value
Range
Example
Parameter-
wui.https_enable
Description
Format
Default Value
Matrix SPARSH VP110 User Guide
Configuration File
<MAC>.cfg
Enables or disables the IP phone to access its web
user interface using HTTP protocol.
Note: If you change this parameter, the IP phone will
reboot to make the change take effect.
Boolean
1
Valid values are:
0‐Disabled
1‐Enabled
wui.http_enable = 1
Configuration File
<MAC>.cfg
Configures the HTTP port used to access the web user
interface of the IP phone.
The default HTTP port is 80.
Note: If you change this parameter, the IP phone will
reboot to make the change take effect.
Integer
80
1 to 65535
network.port.http = 80
Configuration File
<MAC>.cfg
Enables or disables the IP phone to access its web
user interface using HTTPS protocol.
Note: If you change this parameter, the IP phone will
reboot to make the change take effect.
Boolean
1
367