Matrix Sparsh VP110 User Manual page 39

The network parameters are configurable via phone user interface:
• Press the Next soft key after finishing network setting.
• Configure the Provisioning Server Address, Authentication User Name (optional) and Password
(optional) in the Auto Provision screen.
Plug and Play (PnP) Server
SPARSH VP110 IP phones support obtaining the Provisioning Server details from the PnP server. The phone
broadcasts the PnP SUBSCRIBE message to obtain the Provisioning Server details during startup. To use Plug
and Play, make sure this feature is enabled.
To enable PnP via web user interface:
• Click on Settings->Auto Provision.
• Select the On check box in the PNP Active field.
Matrix SPARSH VP110 User Guide 31