Matrix Sparsh VP110 User Manual page 431

Parameter-
multicast.receive_priority.priority
Description
Format
Default Value
Range
Example
Parameter-
multicast.listen_address.X.label
Description
Format
Default Value
Range
Example
Parameter-
multicast.listen_address.X.ip_address
Description
Format
Default Value
Range
Example
Matrix SPARSH VP110 User Guide
Configuration File
<MAC>.cfg
Configures the priority of multicast paging calls.
1 is the highest priority, 10 is the lowest priority.
If it is set to 0, all incoming multicast paging calls will
be automatically ignored.
Integer
10
0 to10
multicast.receive_priority.priority = 10
Configuration File
<MAC>.cfg
Configures the label to be displayed on the LCD
screen when receiving the RTP multicast.
X ranges from 1 to 10.
String
Blank
String within 99 characters
multicast.listen_address.1.label = Paging1
Configuration File
<MAC>.cfg
Configures the multicast address and port number
that the IP phone listens to.
X ranges from 1 to 10.
Note: The valid multicast IP addresses range from
224.0.0.0 to 239.255.255.255.
String
Blank
Not Applicable
multicast.listen_address.1.ip_address =
224.5.6.20:10008
423