Matrix Sparsh VP110 User Manual page 496

characters.
call_waiting.on_code =333
#configures the call waiting off code.The default value is blank.String within 32
characters.
call_waiting.off_code =334
#enables or disables the phone to automatically redial the called number when the
called party is temporarily unavailable.
#0-Disabled(default), 1-Enabled.
auto_redial.enable = 0
#configures the interval (in seconds) for the phone to wait before redial.The
default value is 10.Integer from 1 to 300.
auto_redial.interval = 10
#configures the auto redial times when the called party is temporarily
unavailable. The default value is 10.Integer from 1 to 300.
auto_redial.times = 10
#configures the "#" or "*" key as a send key.0-Disabled,1-# key(Default),2-* key.
features.key_as_send =1
#enables or disables the phone to reserve the pound sign when dialing out.0-
Disabled (convert the pound sign into "%23"),1-Enabled(Default).
#Web UI Path:Features-->General Information-->Reserve # in User Name
sip.use_23_as _pound =1
#configures the hotline number.The default value is blank.String within 32
characters.
features.hotline_number =1212
#configures the delay time (in seconds) for the phone to dial out the hotline
number automatically.The default value of delay time is 4.Integer from 0 to 10.
features.hotline_delay =4
#configures the duration time (in seconds) for the busy tone.The default value is
0.0, 3 or 5
features.busy_tone_delay =0
#configures a return code and reason of SIP response messages when rejecting an
incoming call.404-No Found,480-Temporarily not available,486-Busy here(Default).
features.normal_refuse_code =486
#configures a return code and reason of SIP response messages when rejecting an
incoming call by DND.404-No Found,480-Temporarily not available (Default),486-
Busy here.
488 Matrix SPARSH VP110 User Guide