Matrix Sparsh VP110 User Manual page 365

Static Network Settings
Parameter-
network.internet_port.type
Description
Format
Default Value
Range
Example
Parameter-
network.ip_address_mode
Description
Format
Default Value
Range
Example
Parameter-
network.internet_port.ip
Description
Format
Default Value
Range
Example
Matrix SPARSH VP110 User Guide
Configuration File
<MAC>.cfg
Configures the Internet port type.
Note: If you change this parameter, the IP phone will
reboot to make the change take effect.
Integer
0
Valid values are:
0‐DHCP
1‐PPPoE
2‐Static IP Address
network.internet_port.type = 2
Configuration File
<MAC>.cfg
Configures the IP address mode.
IP phones support using the IPv4 address only, the IPv6
address only or both IPv4 and IPv6 addresses.
Note: If you change this parameter, the IP phone will
reboot to make the change take effect.
Integer
0
Valid values are:
0‐IPv4
1‐IPv6
2‐IPv4&IPv6
network.ip_address_mode = 0
Configuration File
<MAC>.cfg
Configures the IP address when the Internet port type
is configured as Static IP Address and the IP address
mode is configured as IPv4 or IPv4&IPv6.
Note: If you change this parameter, the IP phone will
reboot to make the change take effect.
IPv4Address
Blank
Not Applicable
network.internet_port.ip = 192.168.1.20
357