Matrix Sparsh VP110 User Manual page 233

• Enter the HTTP port number in the HTTP Port (1~65535) field.
The default HTTP port number is 80.
• Select the desired value from the HTTPS list.
• Enter the HTTPS port number in the HTTPS Port (1~65535) field.
The default HTTPS port number is 443.
• Click Confirm to save the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
• Click OK to reboot the IP phone.
To configure web server type via phone user interface:
• Press Menu->Settings->Advanced Settings (password: 1234) ->Network->Webserver Type.
• Press
or
• Enter the HTTP port number in the HTTP Port field.
• Press
or
• Enter the HTTPS port number in the HTTPS Port field.
• Press the Save soft key to save the change.
The IP phone reboots automatically to make settings effective after a period of time.
Matrix SPARSH VP110 User Guide
, or the Switch soft key to select the desired value from the HTTP Status field.
, or the Switch soft key to select the desired value from the HTTPS Status field.
225