Matrix Sparsh VP110 User Manual page 71

To configure the NTP server, time zone and DST via web user interface:
• Click on Settings->Time & Date.
• Select Disabled from the Manual Time list.
• Select the desired time zone from the Time Zone list.
• Enter the domain names or IP addresses in the Primary Server and Secondary Server fields
respectively.
• Enter the desired time interval in the Synchronism (15~86400s) field.
• Select the desired value from the Daylight Saving Time list.
If you select Enabled, do one of the following:
Click DST By Date in Fixed Type.
Enter the start time in the Start Date field.
Enter the end time in the End Date field.
Click DST By Week in Fixed Type.
Select the desired values from the lists of DST Start Month, DST Start Day of Week, DST Start Day of
Week Last in Month, DST Stop Month, DST Stop Day of Week and DST Stop Day of Week Last in
Month.
Enter the desired time in the Start Hour of Day field.
Matrix SPARSH VP110 User Guide 63