Table of Contents
Advertisement
To configure VLAN for Internet port via web user interface:
•
Click on Network->Advanced.
•
In the VLAN block, select the desired value from the WAN Port Active list.
•
Enter the VLAN ID in the VID (1-4094) field.
•
Select the desired value (0-7) from the Priority list.
•
Click Confirm to save the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
•
Click OK to reboot the IP phone.
To configure VLAN for PC port via web user interface:
•
Click on Network->Advanced.
•
In the VLAN block, select the desired value from the PC Port Active list.
•
Enter the VLAN ID in the VID (1-4094) field.
•
Select the desired value (0-7) from the Priority list.
•
Click Confirm to save the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
Matrix SPARSH VP110 User Guide
269
- Quick Links:
- Configuration Methods
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Sparsh VP110 and is the answer not in the manual?
Questions and answers