Matrix Sparsh VP110 User Manual page 56

• Secondary DNS
Procedure
Network parameters can be configured manually using the configuration files or locally.
Configuration File
Local
To configure the IP address mode via web user interface:
• Click on Network->Basic.
• Select desired value from the Mode (IPv4/IPv6) list.
• Click Confirm to save the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
• Click OK to reboot the IP phone.
48
<MAC>.cfg
Web User Interface
Phone User Interface
Configure network parameters of the IP
phone manually.
For more information, refer "Appendix
D ‐ Configuration Parameters".
Configure network parameters of the IP
phone manually.
Navigate to:
http://<phoneIPAddress>/
servlet?p=network&q=load
Configure network parameters of the IP
phone manually.
Matrix SPARSH VP110 User Guide