Auto Answer - Matrix Sparsh VP110 User Manual

Auto Answer

Auto answer allows IP phones to automatically answer an incoming call. IP phones will not automatically answer
the incoming call during a call even if auto answer is enabled. Auto-Answer delay defines a period of delay time
before the IP phone automatically answers incoming calls.
Procedure
Auto answer can be configured using the configuration files or locally.
Configuration File
Local
To configure auto answer via web user interface:
• Click on Account-> Basic.
142
<MAC>.cfg
<MAC>.cfg
Web User Interface
Phone User Interface
Configure auto answer.
For more information, refer "Appendix
D ‐ Configuration Parameters".
Specify a period of delay time for auto
answer.
For more information, refer "Appendix
D ‐ Configuration Parameters".
Configure auto answer.
Navigate to: http://<phoneIPAddress>/
servlet?p=account‐
basic&q=load&acc=0
Specify a period of delay time for auto
answer.
Navigate to:
http://
<phoneIPAddress>servlet?p=features‐
general&q=load
Configure auto answer.
Matrix SPARSH VP110 User Guide