Matrix Sparsh VP110 User Manual page 405

Range
Example
Parameter‐
account.X.advanced.timer_t4
Description
Format
Default Value
Range
Example
Session Timer
Parameter‐
account.X.session_timer.enable
Description
Format
Default Value
Range
Example
Parameter‐
account.X.session_timer.expires
Description
Format
Default Value
Range
Matrix SPARSH VP110 User Guide
2 to 40
account.1.advanced.timer_t2 = 4
Configuration File
<MAC>.cfg
Configures the session timer of T4 (in seconds) for
account X.
T4 represents the maximum duration a message will
remain in the network.
X is 1.
Float
5
2.5 to 60
account.1.advanced.timer_t4 = 5
Configuration File
<MAC>.cfg
Enables or disables the session timer for account X.
If it is set to 1 (Enabled), IP phone will send periodic
re‐INVITE requests to refresh the session during a call.
X is 1.
Boolean
0
Valid values are:
0‐Disabled
1‐Enabled
account.1.session_timer.enable = 1
Configuration File
<MAC>.cfg
Configures the IP phone to refresh the session during
a call at regular intervals (in seconds) for account X.
If it is set to 1800 (1800s), the IP phone will refresh
the session during a call before 1800 seconds.
X is 1.
Integer
1800
30 to 7200
397