Matrix Sparsh VP110 User Manual page 421

Parameter-
features.dtmf.transfer
Description
Format
Default Value
Range
Example
Incoming Intercom calls
Parameter‐
features.intercom.allow
Description
Format
Default Value
Range
Example
Parameter‐
features.intercom.mute
Description
Matrix SPARSH VP110 User Guide
Configuration File
<MAC>.cfg
Configures the DTMF digits to be transmitted to
complete the transfer.
Note: It works only if the parameter
"features.dtmf.replace_tran" is set to 1 (Enabled).
String
Blank
Valid values are: 0‐9, *, # and A‐D.
String within 32 characters
features.dtmf.transfer = 123
Configuration File
<MAC>.cfg
Enables or disables the IP phone to automatically
answer an incoming intercom call.
If it is set to 0 (Disabled), the IP phone will reject
incoming intercom calls and sends a busy signal to
the caller.
If it is set to 1 (Enabled), the IP phone will
automatically answer an incoming intercom call.
Boolean
1
Valid values are:
0‐Disabled
1‐Enabled
features.intercom.allow = 1
Configuration File
<MAC>.cfg
Enables or disables the IP phone to mute the
microphone when answering an intercom call.
If it is set to 0 (Disabled), the microphone is un‐muted
for incoming calls.
If it is set to 1 (Enabled), the microphone is muted for
intercom calls.
413