Matrix Sparsh VP110 User Manual page 497

features.dnd_refuse_code =480
#enables or disables call completion feature.0-Disabled(default), 1-Enabled.
features.call_completion_enable =0
#configures the delay time (in seconds) for the dial-now rule.The default value
is 0.Integer from1 to 14.
phone_setting.dialnow_delay =0
#enables or disables the phone to support RFC 2543 hold (c=0.0.0.0).0-
Disabled(default), 1-Enabled.
sip.rfc2543_hold =0
#enables or disables the phone to keep sending SIP requests to the outbound
server in a dialog.0-Disabled, 1-Enabled(default).It takes effect after a
reboot.
sip.use_out_bound_in_dialog =1
#enables or disables the phone to deal with the 180 SIP message received after
the 183 SIP message.0-Disabled, 1-Enabled(default).
phone_setting.is_deal180 =1
#enables or disables the phone to provide the logon wizard during startup.0-
Disabled(default), 1-Enabled.
phone_setting.logon_wizard=0
#configures the prefix of the password-dial number.
#Web UI Path--->Features-->General Information-->PswPrefix.
#For example, set the prefix to 12 and the length to 3, when you want to dial the
number 123456, the entered number is displayed as 12***6 on the LCD screen.
#The default value is blank.String within 32 characters.
features.password_dial.prefix =12
#configures the number of digits to be hidden.The hidden digits are displayed as
asterisks on the LCD screen. The default value is blank.Integer from 0 to 99.
#Web UI Path--->Features-->General Information-->PswLength.
features.password_dial.length =6
#enables or disables password dial feature for the phone.0-Disabled(default), 1-
Enabled.
#Web UI Path--->Features-->General Information-->PswDial.
features.password_dial.enable =0
#enables or disables the phone to save the call history.0-Disabled, 1-
Enabled(default).
features.save_call_history =1
Matrix SPARSH VP110 User Guide 489