Matrix Sparsh VP110 User Manual page 485

parameter "account.1.sip_server.1.failback_mode " is set to 3 (duration).
#If you set the parameter between 1 and 59, the timeout will be 60 seconds.The
default value is 3600.Range 0 & 60 to 65535
account.1.sip_server.1.failback_timeout =60
#enables or disables the phone to send registration requests to the secondary
server for account
account.1.sip_server.1.register_on_enable =0
#The following configuration for server 2 is same as above description.
account.1.sip_server.2.address =matrix.pbx2.com
account.1.sip_server.2.port =5090
account.1.sip_server.2.expires =3000
account.1.sip_server.2.retry_counts =5
account.1.sip_server.2.failback_mode =0
account.1.sip_server.2.failback_timeout =70
account.1.sip_server.2.register_on_enable =0
### Features on the Account Page#####
#enables or disables anonymous call feature for account.0-Disabled(Default),1-
Enabled
account.1.anonymous_call = 0
#configures the phone to send anonymous on/off code to activate/deactivate the
server-side anonymous call feature for account.0-Off Code(Default),1-On Code.
account.1.send_anonymous_code = 0
#configures the code for activating the server-side anonymous call feature for
account when the parameter "account.1.send_anonymous_code" is set to 1 (On
Code).
#The default value is blank.String within 32 characters.
account.1.anonymous_call_oncode =182
##configures the code for deactivating the server-side anonymous call feature for
account when the parameter "account.1.send_anonymous_code" is set to 0 (Off
Code).
#The default value is blank.String within 32 characters.
account.1.anonymous_call_offcode =185
#enables or disables anonymous call rejection feature for account.0-
Disabled(Default),1-Enabled.
Matrix SPARSH VP110 User Guide
when encountering a failover.0-Disabled(Default),1-Enabled.
477