Matrix Sparsh VP110 User Manual page 374

Default Value
Range
Example
Parameter-
phone_setting.talk_and_dial_power_le
d_enable
Description
Format
Default Value
Range
Example
Contrast
Parameter-
phone_setting.contrast
Description
Format
Default Value
Range
Example
366
0
Valid values are:
0‐Disabled (power indicator LED does not flash)
1‐Enabled (power indicator LED fast flashes (500ms)
green)
phone_setting.hold_and_held_power_led_flash_ena
ble = 0
Configuration File
<MAC>.cfg
Enables or disables the power indicator LED to be
turned on when the phone is busy.
If it is set to 0, the status of the power indicator LED is
determined by the value of the parameter
"phone_setting.common_power_led_enable".
Boolean
0
Valid values are:
0‐Disabled (power indicator LED is off)
1‐Enabled (power indicator LED is solid green)
phone_setting.talk_and_dial_power_led_enable = 1
Configuration File
<MAC>.cfg
Configures the contrast of the LCD screen.
It configures the LCD's contrast of the IP phone only.
Note: We recommend that you set the contrast of the
LCD screen to 6 as a more comfortable level.
Integer
6
1 to 10
phone_setting.contrast = 6
Matrix SPARSH VP110 User Guide