Web Server Type - Matrix Sparsh VP110 User Manual

Web Server Type

Web server type determines access protocol of the IP phone's web user interface. IP phones support both HTTP
and HTTPS protocols for accessing the web user interface. HTTP is an application protocol that runs on top of the
TCP/IP suite of protocols. HTTPS is a web protocol that encrypts and decrypts user page requests as well as
pages returned by the web server. Both HTTP and HTTPS port numbers are configurable.
Procedure
Web server type can be configured using the configuration files or locally.
Configuration File
Local
To configure web server type via web user interface:
• Click on Network->Advanced.
• Select the desired value from the HTTP list.
224
<MAC>.cfg
Web User Interface
Phone User Interface
Configure the web access type, HTTP
port and HTTPS port.
For more information, refer
"Appendix D ‐ Configuration
Parameters".
Configure the web access type, HTTP
port and HTTPS port.
Navigate to:
http://<phoneIPAddress>/
servlet?p=network‐adv&q=load
Configure the web access type, HTTP
port and HTTPS port.
Matrix SPARSH VP110 User Guide