Matrix Sparsh VP110 User Manual page 406

Example
Parameter‐
account.X.session_timer.refresher
Description
Format
Default Value
Range
Example
Call Hold
Parameter-
features.play_hold_tone.enable
Description
Format
Default Value
Range
Example
Parameter-
features.play_hold_tone.delay
Description
398
account.1.session_timer.expires = 1800
Configuration File
<MAC>.cfg
Configures the session timer refresher for account X.
If it is set to 0 (UAC), refreshing the session is
performed by the IP phone.
If it is set to 1 (UAS), refreshing the session is
performed by a SIP server.
X is 1.
Integer
0
Valid values are:
0‐UAC
1‐UAS
account.1.session_timer.refresher = 0
Configuration File
<MAC>.cfg
Enables or disables the IP phone to play a tone when
there is a hold call on the IP phone.
Boolean
1
Valid values are:
0‐Disabled
1‐Enabled
features.play_hold_tone.enable = 1
Configuration File
<MAC>.cfg
Configures the interval (in seconds) at which the IP
phone plays a hold tone.
If it is set to 30 (30s), the IP phone will play a hold
tone every 30 seconds when there is a hold call on
the IP phone.
Note: It works only if the parameter
"features.play_hold_tone.enable" is set to 1
(Enabled).
Matrix SPARSH VP110 User Guide