•
Select the desired value from the PC Port Link list.
•
Click Confirm to save the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
•
Click OK to reboot the phone.
Configuring PC Port Mode
The PC port on the back of the IP phone is used to connect a PC, which can be configured in the following mode:
•
Bridge: The IP phone functions as a bridge, and the connected PC appears on the network as a stand-
alone device with its own IP address.
Procedure
PC port mode can be configured using the configuration files or locally.
Matrix SPARSH VP710 User Guide
85