Obtaining The Address Of Provisioning Server; Zero Touch - Matrix Sparsh VP110 User Manual

Location for Configuration Files
The MAC-Oriented Configuration files needs to be kept in the FTP/TFTP/HTTP/HTTPS Servers' root directory in
the network.

Obtaining the Address of Provisioning Server

SPARSH VP110 IP phones support obtaining the Provisioning Server Address in the following ways:
•

Zero Touch

• Plug and Play (PnP) Server
• DHCP Options
• Phone Flash
The priority of obtaining the provisioning server address is as follows:
Zero Touch-->PnP Server-->DHCP Options (Custom option--> Option 66 or Option 43) --> Phone Flash.
If using any of the above mentioned methods, the Auto Provisioning Server URL needs to be send to the phone in
below format depending on the provisioning protocol :
• In case of FTP: ftp://URL (IP Address or Domain Name)
• In case of TFTP : Direct URL (IP Address or Domain Name)
• In case of HTTP : http://URL (IP Address or Domain Name)
• In case of HTTPS : https://URL (IP Address or Domain Name)
Zero Touch
Zero Touch allows you to configure the network parameters and provisioning server address via phone user
interface during startup. This feature is helpful when there is a system failure on the phone. To use Zero Touch,
make sure this feature is enabled.
To configure the Zero Touch via web user interface:
• Click on Settings->Auto Provision.
• Select Enabled from the Zero Active list.
Matrix SPARSH VP110 User Guide 29