Matrix Sparsh VP110 User Manual page 134

Local
To configure SIP account and server redundancy features using the configuration files:
• Configure the following parameters in the <MAC>.cfg file as per the tables shown below:
Account Configuration and Registration
Parameter
account.1.enable
account.1.register.en
able
account.1.label
account.1.display_na
me
account.1.auth_name
account.1.user_name
account.1.password
account.1.sip_server.
Y.address =
(Y ranges from 1 to 2.)
126
Web User Interface
Phone User Interface
Valid Values
It enables or disables the account.
0‐Disabled
0 or 1
1‐Enabled
The default value is 0.
Enables or Disables the account registration.
0‐Disabled
0 or 1
1‐Enabled
The default value is 1.
It configures the label displayed on the LCD
String within 99
screen for the account.
characters
The default value is blank.
It configures the display name for account.
String within 99
characters
The default value is blank.
It configures the user name for register
String within 99
authentication for the account.
characters
The default value is blank.
It configures the register user name for the
String within 32
account.
characters
The default value is blank.
It configures the password for register
String within 99
authentication for the account.
characters
The default value is blank.
It configures the IP address or domain name of
the SIP server Y for the account.
IP address or
Example:
domain name
account.1.sip_server.1.address = 10.2.1.128
The default value is blank.
Configure the server redundancy on
the IP phone.
Navigate to:
http://<phoneIPAddress>/
servlet?p=account‐
register&q=load&acc=0
Configure the SIP account and related
parameters.
Descriptions
Matrix SPARSH VP110 User Guide
Web Interface Path
Account‐>Register ‐
>Line Active
Account‐>Register‐
>Register
Account‐>Register ‐
>Label
Account‐>Register ‐
>Display Name
Account‐>Register ‐
>Register Name
Account‐>Register ‐
>User Name
Account‐>Register ‐
>Password
Account‐>Register ‐
>SIP Server Y‐>
Server Host