Configuring Sparsh Vp210 - Matrix SPARSH VP210 Quick Start Manual

Configuring SPARSH VP210

SPARSH VP210 provides an embedded web server with a Graphic User Interface (GUI),
Jeeves, for configuration. You can access this embedded web server on the PC connected to
the PC port or LAN port.
You can configure Network Settings also from the Phone Menu. To do so,
• Press Menu Key.
• Scroll using the Up/Down Navigation Key to select Settings and press Select Key.
• Scroll using the Up/Down Navigation Key to select Network Settings and press Select Key.
• Scroll using the Up/Down Navigation Key to select Connection Type and press Select Key.
• Scroll using Right Navigation > Key or Left Navigation < Key, to select the Connection Type as
Static.
To view the Dynamic IP Address assigned to the phone,
• Press Menu Key.
• Scroll using the Up/Down Navigation Key to select Phone Info and press Select Key.
• IP Address assigned to the phone is displayed. Take a note of the same.
• Make sure your PC is in the same Subnet as SPARSH VP210. Change the Subnet Mask of the
PC, if necessary.
• Open a web browser (Mozilla Firefox 90.0.2 or Google Chrome 96.0.4664.45 or Microsoft
Edge 85.0.564.67) on the PC.
• Enter the current IP Address of SPARSH VP210 in the address bar of the browser. Static
Default: 192.168.001.016
13