Matrix Sparsh VP110 User Manual page 301

capable of adapting the changes in the network's delay. The range of the delay time for the dynamic jitter buffer
added to packets can be also configured on IP phones.
Procedure
Jitter buffer can be configured using the configuration files or locally.
Configuration File
Local
To configure Jitter Buffer via web user interface:
• Click on Settings->Voice.
• Click the desired option in Type.
• Enter the minimum delay time for adaptive jitter buffer in the Min Delay field.
Valid values range from 0 to 300.
• Enter the maximum delay time for adaptive jitter buffer in the Max Delay field.
Valid values range from 0 to 300.
• Enter the fixed delay time for fixed jitter buffer in the Normal field.
Matrix SPARSH VP110 User Guide
<MAC>.cfg
Web User Interface
Configure the mode of jitter buffer
and the delay time for jitter buffer.
For more information, refer
"Appendix D ‐ Configuration
Parameters".
Configure the mode of jitter buffer
and the delay time for jitter buffer.
Navigate to:
http://<phoneIPAddress>/
servlet?p=settings‐voice&q=load
293