Transfer via DTMF
Call transfer is implemented via DTMF on some traditional servers. The IP phone sends specified DTMF digits to
the server for transferring calls to third parties.
Procedure
Configuration changes can be performed using the configuration files or locally.
Configuration File
Local
To configure transfer via DTMF via web user interface:
•
Click on Features->General Information.
•
Select the desired value from the DTMF Replace Tran list.
204
<MAC>.cfg
Web User Interface
Configure transfer via DTMF.
For more information, refer
"Appendix D ‐ Configuration
Parameters".
Configure transfer via DTMF.
Navigate to:
http://<phoneIPAddress>/
servlet?p=features‐general&q=load
Matrix SPARSH VP110 User Guide
Need help?
Do you have a question about the Sparsh VP110 and is the answer not in the manual?