Conference - Matrix Sparsh VP110 User Manual

Conference

You can create a conference with other parties using the phone's local conference. You can create a conference
between an active call and a call on hold by pressing the Conf soft key.
Local Conference
The IP phone supports up to 3 parties (including yourself) in a conference call. This is the default method of
conference called Local Conference.
To set up a local conference call:
• Place a call to the first party.
• When the first party answers the call, press the NewCall soft key to place a new call.
• The active call is placed on hold.
• Enter the number of the second party and press OK
• When the second party answers the call, you can consult with him or her before adding to the conference.
• Press the Conf soft key again to join all parties in the conference.
You can press the Hold soft key to place the conference on hold. You can press the Split soft key to split the
conference call into two individual calls. To drop the conference call, press the Cancel soft key.
Network Conference
You can use network conference on the IP phone to conduct a conference with multiple participants.
This feature allows you to perform the following:
• Join two calls together into a conference call.
• Invite another party into an active conference call.
To use this feature, you must configure the network conference URI in advance.
• Network conference is not available on all servers. For more information, contact your ITSP.
• IP phones implement network conference using the REFER method specified in RFC 4579.
Matrix SPARSH VP110 User Guide
, , or the Send soft key.
175