Matrix Sparsh VP110 User Manual page 280

SIP QoS
SIP protocol is used for creating, modifying and terminating two-party or multi-party sessions. To ensure good voice
quality, SIP packets emanated from IP phones should be configured with a high transmission priority.
DSCPs for voice and SIP packets can be specified respectively.
Procedure
QoS can be configured using the configuration files or locally.
Configuration File
Local
To configure DSCPs for voice packets and SIP packets via web user interface:
• Click on Network->Advanced.
• Enter the desired value in the Voice QoS(0~63) field.
272
<MAC>.cfg
Web User Interface
Configure the DSCPs for voice packets
and SIP packets.
For more information, refer
"Appendix D ‐ Configuration
Parameters".
Configure the DSCPs for voice packets
and SIP packets.
Navigate to:
http://<phoneIPAddress>/
servlet?p=network‐adv&q=load
Matrix SPARSH VP110 User Guide