Matrix Sparsh VP110 User Manual page 322

Configuration File
Local
To configure SNMP feature via web user interface:
• Click on Network ->Advanced.
• In the SNMP block, select Enabled from the Active list.
• Enter the SNMP port in the Port (1~65535) field.
• Enter the IP address or domain name of the SNMP server in the Trusted Address field.
314
<MAC>.cfg
Web User Interface
Enable or disable the SNMP feature.
Configure the SNMP port.
Configure IP address(es) or domain
name of the trusted SNMP server.
Multiple IP addresses should be
separated by space.
For more information, refer
"Appendix D ‐ Configuration
Parameters".
Configure SNMP feature.
Navigate to:
http://<phoneIPAddress>/
servlet?p=network‐adv&q=load
Matrix SPARSH VP110 User Guide