Matrix Sparsh VP110 User Manual page 426

Parameter-
voice.tone.dial
voice.tone.ring
voice.tone.busy
voice.tone.congestion
voice.tone.callwaiting
voice.tone.dialrecall
voice.tone.info
voice.tone.stutter
voice.tone.message
voice.tone.autoanswer
Description
Format
Default Value
Range
Example
Remote Phone Book
Parameter-
remote_phonebook.data.X.url
Description
Format
Default Value
Range
418
Configuration File
<MAC>.cfg
Configures the tone for each condition.
tonelist = element[,element] [,element]...
Where
element = [!]Freq1[+Freq2][+Freq3][+Freq4] /
Duration
Freq: the frequency of the tone (ranges from 200 to
7000 Hz). If it is set to 0 (0 Hz), it means the tone is
not played. A tone is comprised of at most four
different frequencies.
Duration: the time duration (in milliseconds, ranges
from 0 to 30000ms) of the ring tone.
You can configure at most eight different tones for
one condition, and separate tones by commas (e.g.,
250/200, !0/1000, 200+300/500, 600+700+800+1000/
2000). The exclamation point (!) can be added
optionally, which means these tones are only played
once.
Note: It works only if the parameter
"voice.tone.country" is set to Custom.
Refer to the introduction above
Blank
Not Applicable
voice.tone.dial = 800+200/1000, 0/100, 500/1200,
500+600+950+1500/5000
Configuration File
<MAC>.cfg
Configures the access URL of the remote XML
phonebook.
X ranges from 1 to 5.
URL
Blank
String within 511 characters
Matrix SPARSH VP110 User Guide