Matrix Sparsh VP110 User Manual page 437

Example
Parameter-
account.X.sip_server.Y.register_on_enabl
e
Description
Format
Default Value
Range
Example
SIP Server Domain Name Resolution
Parameter-
account.X.transport
Description
Format
Default Value
Range
Example
Matrix SPARSH VP110 User Guide
account.1.sip_server.1.failback_timeout = 3600
Configuration File
<MAC>.cfg
Enables or disables the IP phone to register to the
secondary server before sending requests to the
secondary server in the failover mode.
X is 1.
Y ranges from 1 to 2.
Boolean
0
Valid values are:
0‐Disabled
1‐Enabled
account.1.sip_server.1.register_on_enable = 0
Configuration File
<MAC>.cfg
Configures the transport type for account X.
If the parameter is set to 3 (DNS‐NAPTR) and no
server port is given, the IP phone performs the DNS
NAPTR and SRV queries for the service type and
port.
Note: If the outbound proxy server is required and
the transport is set to DNS‐NAPTR, you must set the
port of outbound proxy server to 0 for NAPTR, SRV
and A queries.
X is 1.
Integer
0
Valid values are:
0‐UDP
1‐TCP
2‐TLS
3‐DNS‐NAPTR
account.1.transport = 3
429