Table of Contents
Advertisement
•
Enter the username for authentication in the Identity field.
•
Leave the MD5 Password field blank.
•
In the CA Certificates field, click Browse to select the desired CA certificate (*.pem, *.crt, *.cer or
*.der) from your local system.
•
In the Device Certificates field, click Browse to select the desired client (*.pem or *.cer) certificate
from your local system.
•
Click Upload to upload the certificates.
•
If you select PEAP-MSCHAPv2:
•
Enter the username for authentication in the Identity field.
•
Enter the password for authentication in the MD5 Password field.
•
In the CA Certificates field, click Browse to select the desired CA certificate (*.pem, *.crt, *.cer or
*.der) from your local system.
•
Click Upload to upload the certificate.
•
If you select EAP-TTLS/EAP-MSCHAPv2:
•
Enter the username for authentication in the Identity field.
•
Enter the password for authentication in the MD5 Password field.
•
In the CA Certificates field, click Browse to select the desired CA certificate (*.pem, *.crt, *.cer or
*.der) from your local system.
•
Click Upload to upload the certificate.
•
Click Confirm to save the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
•
Click OK to reboot the IP phone.
To configure the 802.1X authentication via phone user interface:
•
Press Menu->Settings->Advanced Settings (password: 1234) ->Network->802.1x Settings.
•
Press
or
•
If you select EAP-MD5:
•
Enter the username for authentication in the Identity field.
•
Enter the password for authentication in the MD5 Password field.
•
If you select EAP-TLS:
278
, or the Switch soft key to select the desired value from the 802.1x Mode field.
Matrix SPARSH VP110 User Guide
- Quick Links:
- Configuration Methods
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Sparsh VP110 and is the answer not in the manual?
Questions and answers