Matrix Sparsh VP110 User Manual page 274

TIA Organizationally
Specific TLVs
Procedure
LLDP can be configured using the configuration files or locally.
Configuration File
266
Media Capabilities
Network Policy
Extended Power‐via‐MDI
Inventory – Hardware
Revision
Inventory – Firmware
Revision
Inventory – Software
Revision
Inventory – Serial Number
Inventory – Manufacturer
Name
Inventory – Model Name
Asset ID
<MAC>.cfg
The MED device type of the IP phone and the
supported LLDP‐MED TLV type can be encapsulated in
LLDPDU.
The supported LLDP‐MED TLV types are: LLDP‐MED
Capabilities, Network Policy, Extended Power via MDI‐
PD and Inventory.
Port VLAN ID, application type, L2 priority and DSCP
value.
Power type, source, priority and value.
Hardware revision of the IP phone.
Firmware revision of the IP phone.
Software revision of the IP phone.
Serial number of the IP phone.
Manufacturer name of the IP phone.
Model name of the IP phone.
Assertion identifier of the IP phone.
The default value is "asset".
Configure LLDP.
For more information, refer
"Appendix D ‐ Configuration
Parameters".
Matrix SPARSH VP110 User Guide